This happens regardless of the enclosure they're in, and I even tested one of them with a USB 3.0 to SATA III adapter cable, so I could be sure it's coming from the SSD and not the enclosures. ATEM Mini Pro supports multiple disks when used with a USB hub or Blackmagic MultiDock, so when a disk fills. When I tested them with the other enclosures, I did so with the drives idling, so I hadn't realised they do this. The MultiDock 10G works well with the optional HyperDeck Extreme 8K in various recording and playback workflows thanks to the matching USB Type-C External Disk. ID: 637614 Product code: BM-SWATEMMINIBPR. Differential requirement of Tyr1062 multidocking site by RET isoforms to promote neural cell scattering and epithelial. I need to fulfil the 4 slots to get the maximum speed so I can't upgrade easily in the future and the initial investment is very high. However, contrary to my original post, it turns out my new Angelbird SSD's also make a high pitched noise, but only when they're reading or writing. Cons: - The NVMe storage is much more expensive than the 2,5 SSDs. And it doesn't take 3.5" drives either, although that also means it much smaller, which suits me better. There are the two contenders I am looking at to pair with a 2017 iMac 27 - (time to retire my single TB1 port BM Multidock. It's only Thunderbolt 1, whereas the previous units I tried were Thunderbolt 2. I had to disconnect the internal fan (after having StarTech confirm in writing it wouldn't void the warranty), but it now it appears to be silent. This one is another AKiTiO model, although it's actually a rebranded by StarTech. So I've a tried a 3rd desktop Thunderbolt dual drive enclosure. Has anyone encountered a similar noise with other fanless Thunderbolt models, such as the Blackmagic MultiDock? If the noise from the OWC unit is caused by the similar components to those used in the AKiTiO, I'm wondering if there is going to be any way to avoid this sort of problem with a Thunderbolt drive enclosure/dock. When one drive is full, the next drive is accessed for non. I've just spoken to OWC tech support, and they seem adamant that the noise is due to a faulty unit, but I'm doubtful of this, given my experience with the AKiTiO. Support for recording on several drives is provided via a USB hub or a Blackmagic MultiDock. And the SSD's are silent when used in a StarTech USB dock that I have. I've ruled out the SSD's I'm using as the cause, as the OWC unit makes the noise even when the bays are empty. So I've just bought the Thunderbolt version of the OWC Drive Dock - which is fanless - to replace the AKiTiO, but I'm getting a similar high-pitched noise. However, when my dealer contacted AKiTiO about the issue, they confirmed that this noise was inherent to the design, and not due to a fault. AKiTiO advertise it as a noiseless storage solution if used with SSD's and the built-in fan turned off. I've just returned an AKiTiO Thunder2 Duo Pro Thunderbolt 2 dual SATA drive enclosure, because it made an annoying high-pitched noise.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |